File Info
| Exam | NetApp Certified Implementation Engineer - SAN Specialist |
| Number | NS0-509 |
| File Name | Network Appliance.NS0-509.TestKing.2019-09-26.27q.vcex |
| Size | 2 MB |
| Posted | Sep 26, 2019 |
| Download | Network Appliance.NS0-509.TestKing.2019-09-26.27q.vcex |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: MASTEREXAM
With discount: 20%
Demo Questions
Question 1
You want to ensure maximum performance of iSCSI LUNs on an AFF A220.
In this scenario, which two actions will accomplish this task? (Choose two.)
- Disable flow control.
- Configure virtual LAN (VLAN).
- Enable flow control.
- Enable jumbo frames.
Correct answer: CD
Question 2
You are provisioning storage to an ESX host that uses iSCSI.
According to NetApp best practice, which three actions accomplish this task? (Choose three.)
- Enable the iSCSI service.
- Bind the iSCSI ports to the software iSCSI adapter.
- Install Virtual Storage Console (VSC) for VMware.
- Enable BGP on the switch.
- Configure MTU 1500 on the switch.
Correct answer: BCE
Question 3
A customer has an AFF A700 connected to a Cisco switch and has verified connectivity but cannot see any LUNs. The customer issued the run -node scaling-01 -command fcp topology show command to verify the connection.
Referring to the exhibit, what needs to be enabled on the Cisco switch?
- Trunking needs to be enabled.
- VSAN needs to be enabled.
- NPIV needs to be enabled.
- VFC needs to be enabled.
Correct answer: D
Question 4
A customer is using both FC and NVMe in a cluster. The customer needs to do some work on AFF_1.
Referring to the exhibit, what will happen?
- The NVMe namespaces on AFF_2 will be available after takeover of AFF_1.
- The FC LUNs that use cluster interconnect to access the LUNs on AFF_1 will be unavailable after failover.
- The FC LUNs on node AFF_2 will be unavailable after failover of AFF_1.
- The NVMe namespaces on AFF_1 will be unavailable after takeover by AFF_2.
Correct answer: C
Question 5
Which two features does Assymmetric Namespase Access (ANA) support? (Choose two.)
- multipathing
- LUN masking
- LUN hosting
- path management
Correct answer: AD
Explanation:
Reference: https://www.netapp.com/us/media/tr-4684.pdf (16) Reference: https://www.netapp.com/us/media/tr-4684.pdf (16)
Question 6
A customer that is using an AFF A220 has a problem with a host for a new FC LUN. Other LUNs on the same SVM are working properly. This LUN is not visible on the host.
Which configuration does the customer need to verify in their solution?
- LUN mapping with igroup
- host HBA speed settings
- FC target port setting on NetApp node
- FC switch zoning
Correct answer: C
Question 7
A customer has an existing 8-node cluster that consists of six FAS2650 nodes and two FAS2554 nodes. The customer wants to expand the cluster by adding two AFF A220 nodes.
Which resource would be used to determine whether this configuration is supported?
- Interoperability Matrix Tool (IMT)
- Config Advisor
- OneCollect
- Hardware Universe (HWU)
Correct answer: B
Question 8
You deployed a new SVM for FC access, and you used the vserver fcr, create -vserver svm1 - status-admin up command to enable FC service on the SVM. You then created the LIFs for the FC protocol. When you review the status of the LIFs, they show that the admin status is up, but the operational status is down. You have already verified that the ports are physically connected.
In this scenario, what is the next step to bring the LIFs up?
- Use the network interface modify command to change the operational status of the LIFs.
- Create at least one zone that contains your SVM LIF WWPNs and an initiator.
- Verify that an FC license is applied on your system.
- Disable the SAN switch port where your NetApp storage is connected.
Correct answer: B
Question 9
A customer wants to add a 2-port, 32 Gb FC card to support NVMe in an AFF A700 2-node cluster. Currently, there are cards in slots 1, 2, 4, 6, 8, and 9.
Referring to the exhibit, what is the number of the slot that should be used?
- 10
- 3
- 5
- 7
Correct answer: C
Question 10
Referring to the exhibit, which two elements are required for NVMe host access with ONTAP 9.5 and using supported AFF nodes? (Choose two.)
- You need 16 Gb FC HBAs installed in the AFF nodes.
- You must have the license installed for NVMe support in the cluster.
- You must have the license installed for FC support in the cluster.
- You need 32 Gb FC HBAs installed in the AFF nodes.
Correct answer: CD
